GIGABYTE X399 AORUS XTREME Mainboard

1. AMD Ryzen™ Threadripper™ processor

(Please refer “CPU Support List” for more information.)

1. AMD X399

1. 8 x DDR4 DIMM sockets supporting up to 128 GB of system memory
2. 4 channel memory architecture
3. Support for DDR4 3600+*(O.C.) / 3466+(O.C.) / 2933 / 2667 / 2400 / 2133 MHz memory modules
   * Recommend to use a 1st Gen. Ryzen™ Threadripper™ processor to achieve 3600MHz (O.C.) speed.
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
6. Support for Extreme Memory Profile (XMP) memory modules

(Please refer “Memory Support List” for more information.)

1. Support for AMD Quad-GPU CrossFire™ and 4-Way/3-Way/2-Way AMD CrossFire™ technologies
2. Support for NVIDIA® Quad-GPU SLI™ and 4-Way/3-Way/2-Way NVIDIA® SLI™ technologies

1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
2. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
   (The PCIEX16 and PCIEX8 slots conform to PCI Express 3.0 standard.)
3. 1 x PCI Express x1 slot
   (The PCIEX1_1 slot conforms to PCI Express 2.0 standard.)

1. 2 x M.2 connectors (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2M) (M2Q)
2. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe 3.0 x4/x2 SSD support) (M2P)
3. 6 x SATA 6Gb/s connectors
4. Support for RAID 0, RAID 1, and RAID 10

1. 2 x Intel® GbE LAN chips (10/100/1000 Mbit)(LAN1)(LAN2)
2. 1 x Aquantia GbE LAN chip(10 Gbit/5 Gbit/2.5 Gbit/1000 Mbit/100 Mbit)(LAN)

1. Wi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
2. BLUETOOTH 4.2, 4.1, BLE, 4.0, 3.0, 2.1+EDR
3. Support for 11ac wireless standard and up to 867 Mbps data rate
   * Actual data rate may vary depending on environment and equipment.

1. Realtek® ALC1220-VB codec
2. ESS9118EQ chip
3. High Definition Audio
4. 2/4/5.1/7.1-channel
5. Support for S/PDIF Out

1. 8 x USB 3.1 Gen 1 ports on the back panel

Chipset+ASMedia® USB 3.1 Gen 2 Controller:

1. 1 x USB Type-C™ port with USB 3.1 Gen 2 support, available through the internal USB header

Chipset:

1. 1 x USB Type-C™ port on the back panel, with USB 3.1 Gen 2 support
2. 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel
3. 4 x USB 3.1 Gen 1 ports available through the internal USB headers
4. 4 x USB 2.0/1.1 ports available through the internal USB headers

1. 1 x power/reset button
2. 1 x Clear CMOS button
3. 1 x USB Type-C™ port, with USB 3.1 Gen 2 support
4. 1 x USB 3.1 Gen 2 Type-A port (red)
5. 8 x USB 3.1 Gen 1 ports
6. 3 x RJ-45 ports
7. 2 x SMA antenna connectors (2T2R)
8. 1 x optical S/PDIF Out connector
9. 5 x audio jacks

1. 1 x 24-pin ATX main power connector
2. 2 x 8-pin ATX 12V power connectors
3. 1 x OC PEG power connector
4. 1 x CPU fan header
5. 1 x water cooling CPU fan header
6. 3 x system fan headers
7. 2 x system fan/water cooling pump headers
8. 2 x digital(addressable) LED strip headers
9. 2 x digital(addressable) LED strip power select jumpers
10. 2 x RGB (RGBW) LED strip headers
11. 3 x M.2 Socket 3 connectors
12. 6 x SATA 6Gb/s connectors
13. 1 x front panel header
14. 1 x front panel audio header
15. 1 x S/PDIF Out header
16. 1 x USB Type-C™ port, with USB 3.1 Gen 2 support
17. 2 x USB 3.1 Gen 1 headers
18. 2 x USB 2.0/1.1 headers
19. 1 x Trusted Platform Module (TPM) header (2×6 pin, for the GC-TPM2.0_S module only)
20. 1 x BIOS switch
21. 1 x DualBIOS™ switch
22. 2 x temperature sensor headers
23. 1 x Clear CMOS jumper

1. E-ATX Form Factor; 30.5cm x 26.9cm